Capodimonte porcelain: Glaze composition and its technological implications
Source abstract
Abstract
This paper deals with the composition and the application technique of the glazes of the Capodimonte porcelain (1743-1760). The aim of the research was to complete the characterization of this type of historical porcelain, after the previous publication of data related to the body. The glazes were analyzed in thin section, in order to see the number of glaze layers, and by SEM/EDS for the determination of their chemical composition. All the glazes, both colored and uncolored, are of lead-alkaline type with a composition very similar to that of the glazes for the known production of majolica artifacts. They were fired at about 1000 degrees C or less, so that their application was done by brushing when the porcelain body, previously fired at about 1200 degrees C, was non porous. The chemical composition of the glazes permitted to define the raw materials used for obtaining them, and to calculate an approximate formulation of the batch. The raw materials are the same for all types of glaze, but their proportions can be significantly different, especially for lead oxide and sodium chloride. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cultural Heritage Materials Analysis · Conservation Techniques and Studies · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Minieri Riccio, La · 1878
2. Rebuffat · 1905
3. Porcellana di Capodimonte: tra mito e realtà
4. Porcellane di scavo da Capodimonte
5. B. Fabbri, S. Gualtieri, F. Amato, Capodimonte porcelain: a unique manufacture, in: M. Martinón-Torres (Ed.), Craft and Science: International Perspectives on Archaeological Ceramics, Bloomsbury Qatar Foundation, Doha (Qatar), in press.doi:10.5339/uclq.2014.cas.ch13.10.5339/uclq.2014.cas.ch13 ↗
6. Indagini archeometriche sulla porcellana di Capodimonte e criteri di base per una classificazione delle porcellane
7. B. Fabbri, S. Gualtieri, A.M. Lega, Application technology and composition of the glazes of the Renaissance “Italo-Moresque and Diluted Zaffera” majolica manufactured in Faenza (Italy), in: Proceeding of the 32nd International Symposium Archaeometry, Mexico City, 2001 (CD Rom).
8. B. Fabbri, C. Fiori, Influence of sodium chloride on thermal reactions of heavy clays during firing, in: L.G. Schultz, H. van Olphen, and F.A. Mumpton (Eds.), Proceedings of the International Clay Conference, Denver (Colorado), The Clay Minerals Society, Bloomington (Indiana), 1987, pp. 391–395.
9. Emiliani · 1999
10. De l’origine du cobalt: du verre à la ceramique10.3406/arsci.1996.939 ↗
11. A. Ruffini, S. Gualtieri, B. Fabbri, Comparison between Renaissance “Berrettino” glazes from some ceramic centres in northern Italy, in: H. Kars and E. Burke (Eds.), Geoarchaeological and Bioarchaeological Studies 3—Proceedings of the 33rd International Symposium on Archaeometry, Vrije University, Amsterdam, 2005, pp. 249–252.
12. Emiliani · 1999
13. Riccio · 1878
14. C. Piccolpasso, Li tre libri dell’arte del vasaio (The three books of the potter’s technique) (manuscript of the 16th century), in: G. Conti (Ed.), Florence, 1976.
15. The production technology of Italian maiolica: a reassessment10.1016/j.jas.2009.07.006 ↗