The relationship between the silica wet-gels relative optical transmittance at 500 nm and structural features of silica aerogels
Source abstract
Abstract
Abstract Aerogels are usually synthesized from supercritical drying of wet-gels. High quality aerogels are usually characterized with high specific surface area (measured by BET method here) and high degree of polymerization of silicate (characterized by 29 Si NMR here). The quality of the aerogels depends highly on the quality of the corresponding wet-gels because the skeletal structure in the wet-gels changes only slightly in the supercritical drying process. Here we present a simple method to predict the quality of the desired silica aerogels before the supercritical drying. We found that the relative optical transmittance of the silica wet-gels at 500 nm had good linear correlation with the specific surface area and the degree of silicate polymerization in the corresponding aerogels. We can assess the quality and screen out the low-quality wet-gels from supercritical drying operation, and greatly reduce the cost for aerogel production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Mesoporous Materials and Catalysis · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. On the way to commercial production of silica aerogel10.1016/0022-3093(95)90076-4 ↗
2. Chemical engineering of aerogel morphology formed under non-supercritical conditions for thermal insulation10.1021/cm9903428 ↗
3. Thermal conductivity of a clay-based aerogel10.1016/j.ijheatmasstransfer.2008.07.002 ↗
4. Amine distribution and carbon dioxide sorption performance of amine coated silica aerogel sorbents: effect of synthesis methods10.1021/ie401559u ↗
5. Aerogel catalysts10.1016/0166-9834(91)85054-Y ↗
6. Increased photoelectron collection efficiency of a photomultiplier in an aerogel Cherenkov counter10.1016/0029-554X(79)90193-9 ↗
7. On the reconstruction of Cherenkov rings from aerogel radiators10.1016/S0168-9002(00)00452-6 ↗
8. Porous optical composites
9. 1986 · 68
10. Synthesis, structure, and properties of silicon oxycarbide aerogels derived from tetraethylortosilicate/polydimethylsiloxane10.1016/j.ceramint.2014.11.111 ↗
11. Influence of temperature on the physical properties of TEOS silica xerogels10.1016/S0272-8842(97)00085-0 ↗
12. Methanolysis of Si (OCH3)4 and Al (OCH3)3 alkoxides: a comparative study with DFT method10.1016/j.comptc.2013.09.004 ↗
13. Visible light photocatalytic activities of transition metal oxide/silica aerogels10.1016/j.micromeso.2004.07.011 ↗
14. Remnant lipoprotein size distribution profiling via dynamic light scattering analysis10.1016/j.cca.2016.08.012 ↗
15. On the measurement of gold nanoparticle sizes by the dynamic light scattering method10.1134/S1061933X11010078 ↗
16. Effect of sol-gel processing parameters on optical properties of TMOS silica aerogels10.1023/A:1022607125715 ↗
17. Effect of methyltrimethoxysilane as a co-precursor on the optical properties of silica aerogels10.1016/S0022-3093(01)00454-9 ↗
18. Optical transmission properties of silica aerogels prepared from polyethoxidisiloxanes10.1016/S0022-3093(96)00600-X ↗
19. Comparison of some physico-chemical properties of hydrophilic and hydrophobic silica aerogels10.1016/S0272-8842(01)00056-6 ↗
20. Influence of molar ratios of precursor, catalyst, solvent and water on monolithicity and physical properties of TMOS silica aerogels10.1007/BF00486559 ↗
21. Modeling silica aerogel optical performance by determining its radiative properties10.1063/1.4943215 ↗
22. One-step fabrication of transparent hydrophobic silica aerogels via in situ surface modification in drying process10.1007/s10971-016-4146-5 ↗
23. Nitrogen adsorption in compliant material10.1016/S0022-3093(00)00304-5 ↗
24. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
25. Superhydrophobic hybrid aerogel powders from water-glass with distinctive applications10.1016/j.micromeso.2014.07.056 ↗
26. Influence of molar ratios of precursor, solvent and water on physical properties of citric acid catalyzed TEOS silica aerogels10.1016/S0254-0584(97)02055-5 ↗
27. Effects of solvent on TEOS hydrolysis kinetics and silica particle size under basic conditions10.1007/s10971-013-3088-4 ↗
28. Methyltrimethoxysilane based monolithic silica aerogels via ambient pressure drying10.1016/j.micromeso.2006.10.026 ↗
29. Production of carbonate and silica nano-particles in stirred bead milling10.1016/j.minpro.2006.05.007 ↗
30. Solid-state 29Si MAS NMR studies of diatoms: structural characterization of biosilica deposits10.1007/s00216-003-1769-5 ↗
31. XRD, TEM and 29Si MAS NMR study of sol-gel ZnO-SiO2 nanocomposites10.1039/a901001g ↗
32. 29Si MAS NMR study of silica gels and xerogels: influence of the catalyst10.1023/A:1015391922572 ↗