Fabrication of Al2O3–ZrO2 ceramics with high porosity and strength
Source abstract
Abstract
Abstract This study describes the synthesis of ceramics, in which a micrometre-sized Al2O3–ZrO2 nanopowder was used as an oxide base for the hardening of the materials. To a suspension of this mixed metal oxide, the pore-forming crystallisation additives camphor and carbamide were added to produce ceramics with thin permeable pores. Camphor crystallised in the oxide suspension in the form of single pentagonal stars and сarbamide crystallised in the form of thin elongated needles. The use of the different crystallisation additives allowed the formation of ceramics after sintering that have both permeable and complex pore morphologies, where anisotropic properties were observed using carbamide as an additive but not when camphor was used. The total porosity of the resulting ceramics was 51.3%, with a compressive strength in the range of 17.3–92.3 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Applications of porous ceramics10.4028/www.scientific.net/KEM.122-124.305 ↗
2. Development of porous ceramics material
3. Porous ceramics materials
4. Liu · 2014 · 577
5. Fabrication aspects of porous biomaterials in orthopedic applications: a review10.1021/acsbiomaterials.7b00615 ↗
6. Advances in porous scaffold design for bone and cartilage tissue engineering and regeneration10.1089/ten.teb.2018.0119 ↗
7. Finite element analysis on flexural strength of Al2O3–ZrO2 composite ceramics with different proportions10.1016/j.msea.2018.05.075 ↗
8. Microstructure and mechanical properties of Al2O3/ZrO2 directionally solidified eutectic ceramic prepared by laser 3D printing10.1016/j.jmst.2015.11.017 ↗
9. Microstructure and mechanical properties of Al2O3–ZrO2 ceramic deposited by laser direct material deposition10.1016/j.ceramint.2018.07.135 ↗
10. Optimization of the microstructure and properties of Al2O3–ZrO2 reticulated porous ceramics via in-situ synthesis of mullite whiskers and flowing-liquid phase10.1016/j.matlet.2019.02.018 ↗
11. A novel design of Al2O3-ZrO2 reticulated porous ceramics with hierarchical pore structures and excellent properties10.1016/j.jeurceramsoc.2019.01.007 ↗
12. Porous ceramics prepared using poppy seed as a pore-forming agent10.1016/j.ceramint.2006.05.019 ↗
13. Microstructural comparison of porous oxide ceramics from the system Al2O3–ZrO2 prepared with starch as a pore-forming agent10.1016/j.jeurceramsoc.2012.02.005 ↗
14. The preparation and characterization of porous alumina ceramics using an eco-friendly pore-forming agent10.1111/ijac.13126 ↗
15. High-surface-area alumina ceramics fabricated by the decomposition of Al(OH)310.1111/j.1151-2916.2001.tb00687.x ↗
16. Innovation in ceramic foam filters manufacturing process10.1111/ijac.13062 ↗
17. Processing, microstructure and thermoluminescence response of biomorphic yttrium oxide ceramics10.1016/j.ceramint.2016.05.136 ↗
18. Low-temperature preparation of high-performance porous ceramics composed of anorthite platelets10.1111/jace.17265 ↗
19. Fabrication of porous MgAl2O4 ceramics using V2O5 as sintering additive10.1016/j.ceramint.2020.06.049 ↗
20. Preparation and characterization of the three-dimensional network mullite porous fibrous materials by pressure and freeze-casting method10.1016/j.ceramint.2018.11.069 ↗
21. Synthesis of porous ceramics with complex pore structure by freeze-dry processing10.1111/j.1151-2916.2001.tb00638.x ↗
22. Fabrication of porous alumina by directional freeze casting and annealing in TBA–water–sucrose system10.1016/j.ceramint.2018.06.186 ↗
23. Freeze-casting of porous ceramics: a review of current achievements and issues10.1002/adem.200700270 ↗
24. Synthesis and structural evaluation of freeze-cast porous alumina10.1016/j.matchar.2014.08.009 ↗
25. Preparation and characterization of highly porous Yb2SiO5 ceramics using water-based freeze-casting10.1007/s10934-015-0110-y ↗
26. Porous alumina ceramics produced by physical vapor deposition assisted freeze-casting method10.1016/j.matlet.2015.09.037 ↗
27. Freeze casting – a review of processing, microstructure and properties via the open data repository10.1016/j.pmatsci.2018.01.001 ↗
28. Macroporous alumina structures tailored by freeze-casting using naphthalene–camphor as freezing vehicle10.1016/j.ceramint.2018.06.036 ↗
29. Study of preparation of prescribed pore configuration in zirconium dioxide ceramic due to carbamide directional solidification10.1007/s11148-017-0010-6 ↗
30. Freeze-casting – a review of processing, microstructure and properties via the open data repositore10.1016/j.pmatsci.2018.01.001 ↗
31. Freeze gelcasting of aqueous alumina suspensions for porous caramics10.1016/j.ceramint.2012.04.044 ↗
32. Effects of alcohol additives on pore structure and morphology of freeze-cast ceramics10.1016/S1003-6326(14)63116-2 ↗
33. Porous Al2O3-ZrO2 composites fabricated by an ice template method10.1016/j.scriptamat.2009.12.018 ↗