journal article·2024-09Open access

Stabilizing metastable ferroelectric tungsten trioxide phase at room temperature via solvothermal synthesis and millisecond pulsed laser irradiation

Zanlin Qiu, Mohammad Mahafuzur Rahaman, Boyd Panton, Joerg R. Jinschek, Pelagia-Irene (Perena) Gouma

Ceramics International· Volume 50· Issue 17

Abstract

Epsilon tungsten trioxide (ε-WO3) has drawn much attention for its unique gas sensing and ferroelectric properties. However, the strong metastability of ε-phase makes it extremely difficult to stabilize the phase at room temperature. For a long time, it was believed that the ε-phase can only be stabilized by rapid solidification processing. In this study, ε-WO3 was stabilized by employing solvothermal synthesis and subsequent annealing, with the help of Cr- and Ti-dopants. Structural characterization using XRD, Raman and TEM analysis revealed that the as-annealed powders are a mixture of ε-WO3 and γ-WO3 and the fraction of ε-WO3 is directly correlated with the Cr- and Ti-doping levels. Rietveld refinement suggests that the maximum obtainable fractions of ε-phase in as-annealed WO3 are ∼68 % for Cr-doping and ∼87 % for Ti-doping. The growth mechanism is that solvothermal synthesis produced Cr- and Ti-doped W18O49 and subsequent annealing resulted in phase transition from W18O49 to ε-WO3. The XPS analysis reveals the phase stabilization mechanism to involve the interstitial sites of WO3 being occupied by Cr3+ and Ti4+ dopants, resulting in structure distortions. The fraction of ε-WO3 can be further improved to almost 100 % by introducing kinetic constraints using pulsed laser irradiation to rapidly melt and solidify the WO3 (in several milliseconds). A viable solvothermal synthesis route for ε-WO3 and the feasibility to produce ε-phase via additive manufacturing are illustrated in this work.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. High-temperature phase transitions in tungsten trioxide - the last word?10.1088/0953-8984/14/3/308 ↗
2. Advances in electrochemical energy devices constructed with tungsten oxide-based nanomaterials10.3390/nano11030692 ↗
3. Polymorphism in nanocrystalline binary metal oxides10.1680/nme.12.00037 ↗
4. Ferroelectric tungsten trioxide10.1006/jssc.1997.7268 ↗
5. Crystal structure and paramagnetic behaviour of ε-WO3-X10.1088/0953-8984/9/31/010 ↗
6. Physical properties and phase transitions in WO310.1107/S0567739475000745 ↗
7. Dielectric anomaly of tungsten trioxide WO3 with giant dielectric constant10.1002/pssa.200521407 ↗
8. Wang · 2008 · 126
9. Ferroelectric WO3 nanoparticles for acetone selective detection10.1021/cm800761e ↗
10. Low-temperature polymorphism in tungsten trioxide powders and its dependence on mechanical treatments10.1006/jssc.1998.8061 ↗
11. Breath acetone monitoring by portable Si:WO3 gas sensors10.1016/j.aca.2012.06.002 ↗
12. Si:WO3 sensors for highly selective detection of acetone for easy diagnosis of diabetes by breath analysis10.1021/ac902695n ↗
13. Titanium doping effects in electrochromic pulsed spray pyrolysed WO3 thin films10.1016/j.ssi.2008.02.052 ↗
14. Synthesis and VOC degradation ability of a CeO2/WO3 thin-layer visible-light photocatalyst10.1016/j.materresbull.2017.07.003 ↗
15. Highly enhanced acetone sensing performance of porous C-doped WO3 hollow spheres by carbon spheres as templates10.1016/j.snb.2016.08.069 ↗
16. Raman studies of phase transitions in gas-evaporated WO3 microcrystals10.1016/0038-1098(90)90429-F ↗
17. Effect of crystallite size on the low-temperature solid-solid phase transformations in the WO3 system10.1016/j.ceramint.2021.08.254 ↗
18. The influence of sol–gel processing on the electrochromic properties of mesoporous WO3 films produced by ultrasonic spray deposition10.1016/j.solmat.2013.11.002 ↗
19. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
20. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
21. Two-step solvothermal process for nanoarchitectonics of metastable hexagonal WO3 nanoplates10.3390/cryst13040690 ↗
22. Solvothermal synthesis of tungsten oxide nanorod/nanowire/nanosheet10.1111/j.1551-2916.2005.00341.x ↗
23. Raman study of the phase transitions sequence in pure WO3 at high temperature and in HxWO3 with variable hydrogen content10.1016/S0167-2738(99)00101-0 ↗
24. Phase transition in WO3 microcrystals obtained by sintering process10.1002/jrs.727 ↗
25. Cr-doped urchin-like WO3 hollow spheres: the cooperative modulation of crystal growth and energy-band structure for high-sensitive acetone detection10.3390/s20123473 ↗
26. Experimental determination of cooling rates in selectively laser-melted eutectic Al-33Cu
27. Transient nucleation and microstructural design in flash-annealed bulk metallic glasses10.1016/j.actamat.2017.01.059 ↗
28. Control of porosity in parts produced by a direct laser melting process10.3390/app8122573 ↗
29. S. Kou, Basic Solidification Concepts, Welding Metallurgy2002, pp. 143-169.10.1002/0471434027.ch6 ↗
30. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
31. Enhancement of the photocatalytic efficiency of WO3 nanoparticles via hydrogen plasma treatment10.1088/2053-1591/1/4/045044 ↗
32. Psesudocubic phase tungsten oxide as a photocatalyst for hydrogen evolution reaction10.1021/acsaem.9b01790 ↗