Synthesis and characterization of Zn1-xAcxS (0≤x≤0.1) nanocrystalline quantum dots prepared via soft mechanochemical approach
Source abstract
Abstract
Abstract Here, we report a first example of nanocrystalline Zn 1-x Ac x S (0 ≤ x ≤ 0.1) quantum dots prepared via soft mechanochemical approach. The incorporation of up to 10 at.% of Ac ions into the ZnS quantum dots (QDs) allows preservation of the cubic crystal structure as was confirmed by X-ray diffraction and the selected area electron diffraction. The transmission electron microscopy demonstrated that the increase of the Ac ion doping give rise to the increase of the particle size from 4.8 ± 0.3 nm to 17.9 ± 0.3 nm. The energy dispersive X-ray spectroscopy measurements indicated that the Zn 1-x Ac x S powders are stoichiometric at all Ac ion substitutions. The substitution of Zn ions by Ac ions in the Zn 1-x Ac x S nanocrystals was also verified by the Raman and FTIR spectroscopy measurements. The incorporation of the Ac ions into the ZnS QDs showed a red shift of the optical absorption and photoluminescence (PL) spectra. An enhancement of the PL intensity and a decrease of the PL spectrum width were observed due to the partial substitution by the Ac ions in the Zn sites of the ZnS nanocrystals. These properties make the Zn 1-x Ac x S QDs promising candidates for both light emitting and laser diodes applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. Magnetic drug delivery: where the field is going10.3389/fchem.2018.00619 ↗
2. Synthesis and characterization of p-type transparent conducting Ni1-xRuxO (0≤x≤0.1) films prepared by pulsed laser deposition10.1016/j.ceramint.2018.09.214 ↗
3. Synthesis and characterization of 2A-3SHPA decorated ZnS@CdS core–shell heterostructure nanowires as a fluorescence probe for antimony ions detection10.1016/j.snb.2016.07.150 ↗
4. Structural characterization of chlorine intercalated Mg-Al layered double hydroxides: a comparative study between mechanochemistry and hydrothermal methods10.1016/j.jallcom.2016.05.032 ↗
5. Solar blind avalanche photodetector based on the cation exchange growth of β-Ga2O3/SnO2 bilayer heterostructure thin film10.1016/j.solmat.2016.03.015 ↗
6. Stability enhancement in organic solar cells by incorporating V2O5 nanoparticles in the hole transport layer10.1039/C6RA07210K ↗
7. From dots to devices10.1038/nphoton.2009.79 ↗
8. Semiconductor nanocrystals as fluorescent biological labels10.1126/science.281.5385.2013 ↗
9. Semiconductor clusters, nanocrystals, and quantum Dots
10. A facile method to syntheses monodisperse γ-Fe2O3 nanocubes with high magnetic anisotropy density10.1016/j.spmi.2014.01.009 ↗
11. Electrochemical growth of GaSe nanostructures and their Schottky barrier characteristics10.1016/j.spmi.2013.08.025 ↗
12. Development of nanoimprinted InP QDs decorated polyaniline solar cell with conversion efficiency 3%10.1016/j.orgel.2013.07.036 ↗
13. Studies on some aspects of ZnS nanocrystals for possible applications in electronics
14. Optical and optoelectronic properties of ZnS nanostructured thin film10.12693/APhysPolA.114.713 ↗
15. Cubic-to-hexagonal phase transition and optical properties of chemically synthesized ZnS nanocrystals10.1016/j.rinp.2012.09.010 ↗
16. Synthesis and characterization of highly stoichiometric AgInSe2 thin films via a sol-gel spin-coating technique10.1107/S002188981203511X ↗
17. Synthesis and characterization of nanoporous silica film via non-surfactant template sol-gel technique10.1016/j.spmi.2012.06.025 ↗
18. Microwave assisted hydrothermal synthesis of engineered cerium oxide nanopowders10.1016/j.jeurceramsoc.2012.05.003 ↗
19. Hydrothermal synthesis of ultra fine β-Co(OH)2 nanowires with novel morphologies using supercritical water10.1016/j.matlet.2010.12.061 ↗
20. Synthesis and characterization of thin shell hollow sphere NiO nanopowder via ultrasonic technique10.1016/j.matlet.2012.07.036 ↗
21. Synthesis and properties of bismuth oxide nanoshell coated polyaniline nanoparticles for promising photovoltaic properties10.1002/pat.1591 ↗
22. Electrical and mechanical properties of bismuth oxide nanowire/poly(vinyl acetate)10.1002/app.32523 ↗
23. The influence of vanadium pentoxide on the structure and dielectric properties of poly(vinyl alcohol)10.1002/pi.2866 ↗
24. Low temperature synthesis of hexagonal ZnS nanoparticles by a facile microwave assisted single source method10.1016/j.ssc.2008.06.041 ↗
25. Synthesis and properties of transition metals and rare-earth metals doped ZnS nanoparticles10.1016/j.optmat.2005.03.015 ↗
26. Ethylenediamine-mediated wurtzite phase formation in ZnS10.1021/cg301173k ↗
27. Synthesis, characterization and charge transport mechanism of CdZnO nanorods10.1016/j.jallcom.2009.06.117 ↗
28. The influence of temperature on the structure of Cd-doped ZnO nanopowders10.1016/j.jallcom.2009.11.055 ↗
29. Synthesis and optical properties of Ce-doped ZnO hexagonal nanoplatelets10.1016/j.jcrysgro.2010.07.040 ↗
30. Facile synthesis and optical properties of Co3O4 nanostructures by the microwave route10.1016/j.spmi.2010.12.010 ↗
31. Single crystalline quasi aligned one dimensional P-type Cu2O nanowire for improving Schottky barrier characteristics10.1016/j.matlet.2011.03.093 ↗
32. The influence of Cd(ZnO) on the structure, optical and thermal stabilities of polyvinyl chloride nanocomposites10.1002/pc.21132 ↗
33. A novel strategy to synthesize cobalt hydroxide and Co3O 4 nanowires10.1016/j.jpcs.2011.04.014 ↗
34. Synthesis and field emission properties of nickel oxide nanoplatelets prepared by simple novel technique10.1016/j.spmi.2011.04.005 ↗
35. Synthesis and characterization of one-dimensional vertically aligned Sb-doped ZnO nanowires10.1107/S0021889812001665 ↗
36. Synthesis and characterization of self-assembly silver sulfide nanorods prepared by squalene assisted microwave technique10.1016/j.matlet.2013.07.010 ↗
37. Synthesis, characterization and photoluminescence of ZnO:Cd rosette-like nanostructures using solution process10.1016/j.spmi.2012.01.014 ↗
38. Synthesis and characterization of AIS chalcopyrite thin films for solar cell applications10.1016/j.matlet.2012.05.065 ↗
39. Synthesis and characterization of CdxZn1-xO nanoparticles-doped aryl poly ether ether ketone for novel application potentials10.1002/app.35570 ↗
40. Synthesis and characterization of PVA/YBCO nanocomposite for improvement of solar energy conversion10.1002/pc.22460 ↗
41. The influence of sintering temperature on the engineered nanoporous titaniaceramics10.1016/j.matlet.2013.01.039 ↗
42. Synthesis and characterization of transparent optical gas sensor device made of indium oxide pyramid like nanoarchitectures10.1016/j.snb.2013.09.058 ↗
43. Poly(N-isopropylacrylamide) assisted microwave synthesis of magnesium aluminate spinel oxide for production of highly transparent films by hot compression10.1016/j.jeurceramsoc.2014.03.014 ↗
44. Structure and magnetic properties of diluted magnetic metal oxides based on Cu-doped CeO2 nanopowders10.1016/j.ceramint.2014.09.037 ↗
45. A novel recipe to improve the magnetic properties of Mn doped CeO2 as a room temperature ferromagnetic diluted metal oxide10.1016/j.jmmm.2014.02.013 ↗
46. Design of ruthenium/iron oxide nanoparticle mixtures for hydrogenation of nitrobenzene10.1039/C4CY01277A ↗
47. Highly ferromagnetic, transparent conducting electrode based on Ce1-xCuxO2 thin film for spintronic applications10.1016/j.ceramint.2015.03.308 ↗
48. Synthesis and characterization of 4-amino-3-isoxazolidinone intercalated NiAl-LDH for nanocarrier applications10.1016/j.colsurfa.2015.09.011 ↗
49. Structure and properties of the Mn doped CeO2 thin film grown on LaAlO3 (0 0 1) via a modified sol-gel spin-coating technique10.1016/j.jallcom.2015.04.052 ↗
50. Structural, magnetic and optical properties of a dilute magnetic semiconductor based on Ce1-xCoxO2 thin film grown on LaAlO310.1016/j.materresbull.2015.07.044 ↗
51. Observation of room temperature ferromagnetism with giant magnetic moment based on Zn1-xCrxO thin films grown on Si(111) substrate via 1,2-dihydroxyethane modified sol-gel dip-coating technique10.1016/j.matlet.2016.04.163 ↗
52. Schottky barrier effect of ZnO modified methyl glycol thin films for detection of hydrogen sulfide gas10.1016/j.ceramint.2012.11.100 ↗
53. A novel photodiode made of hybrid organic/inorganic nanocomposite10.1088/0022-3727/42/15/155502 ↗
54. Stability of new electrostatic discharge protection and electromagnetic wave shielding effectiveness from poly(vinyl chloride)/graphite/nickel nanoconducting composites10.1016/j.polymdegradstab.2009.02.012 ↗
55. The effect of nanoscale vanadium pentoxide on the electrical and mechanical properties of poly(vinyl alcohol)10.1002/pi.2308 ↗
56. On the degradation and stability of high abrasion furnace black (HAF)/acrylonitrile butadiene rubber (NBR) and high abrasion furnace black (HAF)/graphite/acrylonitrile butadiene rubber (NBR) under cyclic stress-strain10.1016/j.polymdegradstab.2007.08.005 ↗
57. Butadiene acrylonitrile rubber loaded fast extrusion furnace black as a compressive strain and pressure sensors10.1016/j.sna.2006.11.017 ↗
58. The effect of heating-cooling cycles on PTCC and NTCC made of FEF/NBR composites10.1002/app.24504 ↗
59. The physical properties of pressure sensitive rubber composites10.1016/j.polymdegradstab.2005.10.009 ↗
60. The mechanical behaviour of NBR/FEF under compressive cyclic stress-strain10.1088/0022-3727/39/11/017 ↗
61. A novel application of ADC/K-foaming agent-loaded NBR rubber composites as pressure sensor10.1088/0022-3727/39/3/018 ↗
62. Physical studies of foamed reinforced rubber composites part I. Mechanical properties of foamed ethylene-propylene-diene terpolymer and nitrile-butadiene rubber composites10.1002/pi.916 ↗
63. Synthesis of CdZnO thin film as a potential candidate for optical switches10.1016/j.optlastec.2010.02.009 ↗
64. Evaluation and modeling of thermal kinetic degradation for PVA doped PbS quantum dot10.1016/j.materresbull.2011.05.017 ↗
65. Raman and ellipsometry spectroscopic analysis of graphene films grown directly on Si substrate via CVD technique for estimating the graphene atomic planes number10.1016/j.molstruc.2016.04.028 ↗
66. Simulation of optical excitation spectra of semiconductor nanowires within effective bond orbital model10.1016/j.cpc.2015.05.023 ↗
67. Low temperature synthesis of CdSe capped 2-mercaptoethanol quantum dots10.1016/j.optmat.2012.01.001 ↗
68. Functionalized ME-capped CdSe quantum dots based luminescence probe for detection of Ba 2+ ions10.1016/j.snb.2012.01.073 ↗
69. Molecular dynamics simulations, thermodynamic analysis, and experimental study of phase stability of zinc sulfide nanoparticles10.1021/jp036108t ↗
70. Quantum dots and their multimodal applications: a review10.3390/ma3042260 ↗
71. 6-Mercaptohexanoic acid assisted synthesis of high quality InP quantum dots for optoelectronic applications10.1016/j.spmi.2013.01.001 ↗
72. Synthesis of self-assembly plasmonic silver nanoparticles with tunable luminescence color10.1016/j.jlumin.2013.09.018 ↗
73. Enhancement of CdSe quantum dots luminescence by calcium ions10.1016/j.jlumin.2012.08.007 ↗
74. One pot synthesis of multi-plasmonic shapes of silver nanoparticles10.1016/j.matlet.2013.04.086 ↗
75. Synthesis and characterization of electropolymerized molecularly imprinted microporous polyaniline films for solar cell applications10.1002/pc.22408 ↗
76. “turn-off-on” fluorescence probe based functionalized InP quantum wires for detection of cyanide anions10.1016/j.snb.2013.03.107 ↗
77. Improved brightness, efficiency, and stability of sputter deposited alternating current thin film electroluminescent ZnS: Mn by codoping with potassium chloride10.1063/1.126007 ↗
78. Synthesis, structural, and optical properties of stable ZnS:Cu,Cl nanocrystals10.1021/jp809666t ↗
79. Enhancement of CdSe quantum dots luminescence by calcium ions10.1016/j.jlumin.2012.08.007 ↗
80. Low temperature growth of metastable cubic CdSe nanocrystals and their photoluminescence properties10.1016/j.jcrysgro.2011.07.029 ↗
81. Synthesis, characterization and luminescence properties of thiol-capped CdSe quantum dots at different processing conditions10.1016/j.optmat.2012.10.018 ↗
82. The temporal evolution of the structure and luminescence properties of CdSe semiconductor quantum dots grown at low temperatures10.1016/j.jlumin.2012.04.040 ↗
83. Low temperature synthesis of CdSe capped 2-mercaptoethanol quantum dots10.1016/j.optmat.2012.01.001 ↗
84. Functionalized ME-capped CdSe quantum dots based luminescence probe for detection of Ba 2+ ions10.1016/j.snb.2012.01.073 ↗
85. Structure and optoelectronic properties of PbSe quantum dots/PVA. Does the polymer molecular weight matter?10.1002/pat.1799 ↗
86. Synthesis, characterization and photoluminescence properties of Sn doped ZnO nanonails10.1016/j.jcrysgro.2011.05.003 ↗
87. Synthesis and characterization of electropolymerized molecularly imprinted microporous polyaniline films for solar cell applications10.1002/pc.22408 ↗
88. Analysis of ZnS nanoparticles prepared by surfactant micelle-template inducing reaction
89. Optical properties of manganese-doped nanocrystals of ZnS10.1103/PhysRevLett.72.416 ↗
90. Spectroscopic ellipsometry of Zn1-xCuxO thin films based on a modified sol-gel dip-coating technique10.1016/j.saa.2013.09.085 ↗
91. Development of highly conductive and transparent copper doped zinc oxide thin films via 2-methoxyethanol modified sol-gel dip-coating technique10.1016/j.ceramint.2013.07.100 ↗
92. Evaluation and modeling of the mechanical behavior of carbon nanoparticle/rubber-modified polyethylene nanocomposites10.1002/app.34107 ↗
93. Synthesis and optical properties of poly (vinyl acetate)/bismuth oxide nanorods10.1002/pat.1720 ↗