Sintering of zirconia composites obtained by slip casting
Source abstract
Abstract
Abstract Composites containing a matrix of nanometric Ce-stabilized zirconia with an addition of micrometric monoclinic zirconia were processed by slip casting and sintered at a relatively low temperature. The ratio between nanometric and micrometric particles was determined according to the viscosity of the suspensions and the final density of the pellets. An optimum amount of micrometric particles was necessary to achieve improved suspension dispersion and higher pellet density. The amount of deflocculant in the suspensions containing the mixture of micrometric and nanometric particles was optimized by viscosity measurements. The pellets were characterized by dilatometry, Hg porosimetry, density measurement (the Archimedes method) and scanning electron microscopy. Despite the low green density obtained (35–38% of the theoretical density), densities as high as 97.5% were achieved after sintering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Synthesis of nanocrystalline tetragonal zirconia by a polymeric organometallic method10.1002/(SICI)1099-0739(199907)13:7<501::AID-AOC866>3.0.CO;2-M ↗
2. Nucleation and growth for synthesis of nanometric zirconia particles by forced hydrolysis10.1006/jcis.1997.5290 ↗
3. Sintering studies of nanophase ceramic oxides using small angle scattering10.1016/0272-8842(96)84747-X ↗
4. Low-temperature preparation of nanostrutuctured zirconia and YSZ by sol-gel processing10.1007/BF00356338 ↗
5. Dense nanometric ZrO2–Al2O3 from spray-pyrolysed powders10.1016/S0927-7757(97)00108-8 ↗
6. High fracture toughness of ZrO2 solid-solution ceramics with nanometer grain size in the system ZrO2–Al2O310.1007/BF00241711 ↗
7. Slip casting of nanometer sized tetragonal zirconia powder
8. Slip casting nanometer-sized powders
9. Plastic extrusion forming of nanometer size tetragonal zirconia powder
10. Influence of various consolidation techniques on the green microstructure and sintering behavior of alumina powders10.1111/j.1151-2916.1988.tb07567.x ↗
11. Slip casting of partially stabilized zirconia10.1007/BF00557158 ↗
12. Dispersion of ZrO2 particles in aqueous suspensions by ammonium polyacrylate10.1007/BF01148770 ↗
13. Characterization of submicron alumina dispersions with poly(methacrylic acid) polyelectrolyte10.1016/0955-2219(95)93061-7 ↗
14. Reed · 1995