journal article·2002-01

Interfacial adhesion and microstructure of thick film metallized aluminum nitride substrates

Chir-Jang Tsai, Wenjea J Tseng, Chi-Shiung Hsi

Ceramics International· Volume 28· Issue 1
Publisher page

Abstract

The adhesive strength and fractured microstructure of aluminum nitride (AlN) substrate metallized with resistor thick-films followed by firing at 850 o C have been investigated via a pull-out rupture test loaded in tension. The AlN substrate used includes the as-received form and an oxidized form that was thermally treated at 1450 o C prior to the metallization. The thick-film paste includes both the as-received form (which is an RuO2-based resistor) and a mixture of the paste with varying fractions of submicrometer alumina powder (5–20 wt.%) for comparison purposes. When the as-received AlN is used as the substrate, rupture strength decreases monotonically from 1.2 to 0.1 MPa as the alumina loading (in the film) increased from 0 to 20 wt.%. The strength, however, remains relatively constant ( 0.5 MPa) for the pre-oxidized AlN case, i.e. the adhesion is found insensitive to the change of alumina loading. This strength dependency has been compared with their fractured microstructure and the possible fracture mechanism that caused the failure is discussed. # 2002 Elsevier Science Ltd and Techna S.r.l. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Tummala · 1989
2. Ag–Pd thick film conductor for AlN ceramics10.1109/33.56162 ↗
3. Development of a surface-treatment method for AlN substrate to improve adhesion with thick-film conductors10.1163/156856198X00687 ↗
4. Development of glass frit free metallization systems for AlN10.1023/A:1004449328549 ↗
5. Copper thick film for aluminum nitride substrates
6. Bonding mechanism and stress distribution of a glass frit thick film metallization for AlN-ceramic10.1023/A:1008985505140 ↗
7. Binder chemistry, adhesion and structure of interfaces in thick-film metallized aluminum nitride substrates10.1007/BF00540688 ↗
8. Titanium nitride–molybdenum metallizing method for aluminum nitride10.1109/33.56185 ↗
9. Reactions and thick film metallization on aluminum nitride substrates
10. Oxidation behavior of AlN in the presence of oxide and glass for thick film applications10.1109/33.35489 ↗
11. Porosity development of RuO2-filled glass thick film on aluminum nitride substrate at elevated temperatures10.1023/A:1008971321873 ↗
12. Influence of particulate Al2O3 addition on interfacial microstructure and electrical sheet resistance of thick film metallized aluminum nitride substrates10.1016/S0167-577X(00)00223-8 ↗
13. Oxidation, microstructure and metallization of aluminum nitride substrates10.1023/A:1008977314768 ↗
14. Consideration of inhomogeneity effects in sintering10.1111/j.1151-2916.1982.tb10340.x ↗
15. Viscoelestic stress and sintering damage in heterogeneous powder compacts10.1016/0001-6160(86)90066-0 ↗
16. Sintering with rigid inclusions10.1111/j.1151-2916.1987.tb04870.x ↗
17. Constrained network model for predicting densification behavior of composite powders10.1557/JMR.1987.0059 ↗
18. Oxidation behavior and flexural strength of aluminum nitride exposed to air at elevated temperatures10.1111/j.1151-2916.1994.tb07264.x ↗