journal article·2004-01

Thick film compositions based on titanium silicides for surge resistors

D Szwagierczak

Ceramics International· Volume 30· Issue 5
Publisher page

Abstract

Abstract Thick film compositions based on three titanium silicides: TiSi 2 , TiSi, and Ti 5 Si 3 were prepared and investigated. Resistivities and temperature coefficients of resistance of the layers fired at 850 °C were measured in the temperature range −40 to +160 °C. The resistivities were 0.3–20 Ω per square for the layers containing Pd–Ag addition, fired in air and 20–300 Ω per square for those based exclusively on silicides, fired in nitrogen. Studies of the surge performance of Ti–Si resistors were carried out. The chosen compositions fired in air showed resistivity adequate to print resistors in the rectangular shape, more advantageous for surge resistors than the meander one, low TCR values and small changes in resistivity after high voltage pulsing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Electrical Contact Performance and Analysis · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. S. Vasudevan, A. Shaikh, Low TCR silver palladium thick film resistors for surge protection, in: Proceedings of International Symposium on Microelectronics, Los Angeles, 1995, pp. 685–694.
2. S. Vasudevan, Thick film materials system for surge protection, in: Proceedings of International Symposium on Microelectronics, Minneapolis, 1996, pp. 333–339.
3. S. Vasudevan, Effect of design parameters on overstress characterization of thick film resistors for lightning surge protection, in: Proceedings of International Symposium on Microelectronics, 1997, pp. 634–640.
4. M. Moroz, A. Shaikh, A new generation of low-cost surge resistor materials, Passive Component Industry, September/October 2000, pp. 32–33.
5. Low ohm resistor series for optimum performance in high voltage surge applications10.1108/13565369710800493 ↗
6. S.P. Murarka, Transition metal silicides—low resistivity alternatives for polysilicon and metals in integrated circuits, J. Met. (1984) 57–60.10.1007/BF03338505 ↗
7. Resistivities of thin film transition metal silicides10.1149/1.2123815 ↗
8. Refractory silicides for integrated circuits10.1116/1.570560 ↗
9. C.Y. Kuo, Thick film system for surge protection—part v, in: Proceedings of ISHM Conference, Boston, 1994, pp. 530–535.
10. Reactions during SHS in a Ti–Si–C system