The effect of stoichiometry and the TiCl 3 addition on the microstructure of BaTiO 3
Source abstract
Abstract
Abstract The effect of stoichiometry, i.e. Ba/Ti ratios (1.0025, 1.0 and 0.98) and the TiCl 3 addition on the microstructure and densification of BaTiO 3 were investigated. The BaTiO 3 powders were prepared by the conventional ceramic processing method. The samples were sintered at 1250, 1300, 1335 and 1360 °C for 1 h. The Ba 4 Ti 2 O 27 phase was found in the Ba excess BaTiO 3 , the platelet type Ba 2 Ti 5 O 12 phase was detected in the Ba and Ti excess compositions which were sintered at 1250 and 1300 °C, but not in the stoichiometric composition. When the sintering temperature was increased to 1335 °C the platelet type grain growth disappeared in the Ba excess composition, but remained in the Ti excess composition. In the stoichiometric composition, the fine grained microstructure occurred at 1250 and at 1300 °C large polygonal grains of 20–30 μm in size were obtained within the fine grained matrix. The addition of 0.2 mol% TiO 2 as TiCl 3 to the stoichiometric composition revealed a similar structure at 1250 °C. Below the eutectic temperature, the densification rates of the Ti excess samples were lower than the Ba excess samples, but above this temperature they showed a higher densification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Control of liquid-phase-enhanced discontinuous grain growth in barium titanate10.1111/j.1151-2916.1987.tb04847.x ↗
2. Grain boundary faceting and abnormal grain growth in BaTiO310.1016/S1359-6454(99)00434-6 ↗
3. Abnormal grain growth kinetics of BaTiO3 with an excess TiO210.1016/S1359-6454(97)00340-6 ↗
4. Effect of SiO2 and TiO2 addition on the exaggerated grain growth of BaTiO310.1016/S0955-2219(96)00134-3 ↗
5. Investigation of twin lamellae in BaTiO3 ceramics10.1111/j.1151-2916.1983.tb10078.x ↗
6. The rate-determining mechanism in the sintering of undoped nonstochiometric barium titanate10.1016/S0955-2219(99)00174-0 ↗
7. Grain-growth inhibition in Na2O-doped TiO2-excess barium titanate ceramic10.1111/j.1151-2916.2000.tb01529.x ↗
8. Phase equilibria in the TiO2-rich region of the system BaO–TiO210.1111/j.1151-2916.1974.tb10801.x ↗
9. Ternary systems BaO–TiO2–SnO2 and BaO–TiO2–ZrO210.1111/j.1151-2916.1958.tb13509.x ↗
10. Dedensification and anomalous grain growth during sintering of undoped barium titanate10.1111/j.1151-2916.1997.tb02949.x ↗
11. Influence of stoichiometry and impurity on the sintering behaviour of barium titanate ceramics10.1007/BF01142039 ↗
12. Influence of stoichiometry on the microstructure and positive temperature coefficient of resistivity of semiconducting barium titanate10.1111/j.1151-2916.1990.tb06549.x ↗