Microstructure and mechanical properties of 3-D interpenetrated network structure MoSi2–RSiC composite
Source abstract
Abstract
Abstract In this paper, RSiC is used as matrix, organic precursor impregnation and pyrolysis – MoSi 2 melt infiltration combined processes are employed to prepare the 3-D interpenetrated network structure MoSi 2 –RSiC composite. The composition, microstructure and mechanical properties of MoSi 2 –RSiC composite are studied through XRD, SEM, EDS and mechanical testing. The results show that an almost fully dense MoSi 2 –RSiC composite with 3-D interpenetrated network structure is obtained. The main components of the composite are SiC and MoSi 2 , it also includes small amount of Mo 4.8 Si 3 C 0.6 . The flexural strength of MoSi 2 –RSiC composite is improved compared with that of RSiC, meanwhile, it inherits the high temperature strength characteristic from RSiC. The composite exhibits a typical brittle fracture behavior and the elastic modulus of it also increases with the increase of organic precursor impregnation and pyrolysis cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Effect of the W addition content on valence electron structure and properties of MoSi2-based solid solution alloys10.1016/j.matchemphys.2011.05.049 ↗
2. Investigation of MoSi2 melt infiltrated RSiC and its oxidation behavior10.1016/j.ceramint.2011.04.138 ↗
3. Prediction of strength of re-crystallized silicon carbide from pore size measurement: part 1. The bimodality of the distribution [J]10.1023/A:1004705300886 ↗
4. Study on gel-casting and properties of recrystallized silicon carbide10.1016/S0272-8842(01)00104-3 ↗
5. Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation10.1016/j.solmat.2006.10.021 ↗
6. New R-SiC extends service life in kiln furniture
7. Wear behavior of interpenetrating alumina–copper composites10.1016/j.wear.2011.05.042 ↗
8. A carbon nanotube–alumina network structure for fabricating epoxy composites10.1016/j.scriptamat.2009.04.003 ↗
9. The effect of different sintering additives on the electrical and oxidation properties of Si3N4–MoSi2 composites10.1016/j.jeurceramsoc.2006.07.009 ↗
10. Densification of re-crystallized Silicon carbide prepared by precursor-impregnation and pyrolysis process
11. SiC–Mo≤5Si≤3C≤1 composites by melt infiltration process
12. Advance structural ceramic and its application
13. Rapid densification of C/SiC composites by joint processes of CLVD and PIP10.1016/j.matlet.2011.06.100 ↗
14. High-temperature strength and toughness behaviors for reaction-bonded SiC ceramics below 1400°C10.1016/j.matlet.2005.01.049 ↗