journal article·2009-12

Effect of the excess of bismuth on the morphology and properties of the BaBi2Nb2O9 thin films

T. Mazon, M.A. Zaghete, M. Cilense, J.A. Varela

Ceramics International· Volume 35· Issue 8
Publisher page

Abstract

Abstract In this study, the effect of bismuth content on the crystal structure, morphology and electric properties of barium bismuth niobate (BaBi 2 Nb 2 O 9 ) thin films was explored with the aid of X-ray diffraction (XRD), scanning electron microcopy (SEM), atomic force microscopy (AFM) and dielectric properties. BaBi 2 Nb 2 O 9 (BBN) thin films have been successfully prepared by the polymeric precursor methods and deposited by spin coating on Pt/Ti/SiO 2 /Si (1 0 0) substrates. The phase formation, the grain size and morphology of the thin films were influenced by the addition of bismuth in excess. It was observed that the formation of single phase BBN for films was prepared with excess of bismuth up to 2 wt%. The films prepared with excess of the bismuth showed higher grain size and better dielectric properties. The 2 wt% bismuth excess BBN thin film exhibited dielectric constant of about 335 with a loss of 0.049 at a frequency of 100 kHz at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Fatigue-free ferroelectric capacitors with platinum-electrodes10.1038/374627a0 ↗
2. Composition-related effects of microstructure on the ferroelectric behavior of SBT thin films10.1016/S0169-4332(01)00112-X ↗
3. Effect of the excess of bismuth on the morphology and properties of the BaBi2Ta2O9 ceramics10.1016/j.matlet.2004.11.001 ↗
4. Studies of dielectric characteristics of BaBi2M2O9 ferroelectrics prepared by chemical precursor decomposition method10.1016/j.solidstatesciences.2006.11.014 ↗
5. New non-fatigue ferroelectric thin films of barium bismuth tantalate10.1016/S0167-577X(98)00173-6 ↗
6. Relaxor properties of Ba-based layered perovskites10.1016/S0955-2219(01)00006-1 ↗
7. Dielectric and pyroelectric anisotropy in melt-quenched BaBi2(Nb1−xVx)2O9 ceramics10.1016/j.materresbull.2007.11.012 ↗
8. Growth and characterization of BaBi2Nb2O9 thin films made by RF-magnetron sputtering
9. Growth and characterization of excimer laser-ablated BaBi2Nb2O9 thin films10.1063/1.1329858 ↗
10. Characterization of BaBi2Nb2O9 powders and thin films prepared by a solution synthesis technique10.1016/j.solidstatesciences.2004.03.011 ↗
11. “Sol-gel” preparation of high temperature superconducting oxides10.1007/BF00402588 ↗
12. Impedance spectroscopy of SrBi2Ta2O9 and SrBi2Nb2O9 ceramics correlation with fatigue behavior10.1557/JMR.1997.0215 ↗
13. Evolution of electrical properties for excess Bi2O3 content in SrBi2Ta2O9 ceramics
14. Phase formation and ferroelectric characteristics of nonfatigue barium bismuth tantalate thin films10.1063/1.371695 ↗
15. Influence of vanadium doping on the processing temperature and dielectric properties of barium bismuth niobate ceramics10.1016/j.mseb.2006.02.009 ↗
16. Ferroelectric Bi3.25La0.75Ti3O12 films of uniform a-axis orientation on silicon substrates10.1126/science.1069958 ↗
17. M.P. Pehini, U.S. Patent No. 3,330,697 (1967).10.13182/NT67-A27852 ↗