Synthesis and consolidation of (Zr0.94Y0.06)O1.88 nanopowders
Source abstract
Abstract
Abstract In this study, a crystalline nanopowder of (Zr 0.94 Y 0.06 )O 1.88 has been synthesized by means of combined method of coprecipitation and hydrothermal decomposition using (ZrО(NО 3 ) 2 ×1Н 2 О), (Y(CH 3 COO) 3 ×1H 2 O), NH 4 OH as a precipitator, and hydroxyethylated nonylphenol as SAS. According to the dilatometry data optimal parameters of hot pressing have been determined. Powders were consolidated by means of the method of hot pressing with direct passage of current at 1100–1200 °С. The microstructures and properties of (Zr 0.94 Y 0.06 )O 1.88 powder and ceramics were examined with the use of scanning and transmission electron microscopy, scanning probe microscopy, X-ray phase analysis, Vicker׳s hardness tester at a test load of 1 kg, and uni-axial compressive tests. It was found that as a result of compaction (Zr 0.94 Y 0.06 )O 1.88 ceramics have uniform density distribution (grain sizes of 50–200 nm) with the following optimal mode consolidation values T =1200 °С and P =30 MPa. The fine-grain materials produced show high microhardness of 1408±30 HV 1 and compressive strength of 2586 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · X-ray Diffraction in Crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Ceramic steel10.1038/258703a0 ↗
2. Mechanical properties of toughened ZrO2–Y2O3 ceramics10.1111/j.1151-2916.1986.tb04823.x ↗
3. Chiang · 1997
4. Structural applications of ZrO2-bearing materials
5. Mechanical properties of ceramics
6. Nieh · 1997
7. Fabrication and microstructural characterization of nano-crystalline ZrO2-based composite
8. New design concept of structural ceramics ceramic nanocomposites10.2109/jcersj.99.974 ↗
9. High and low temperature superplasticity in nanocrystalline materials10.1016/S0965-9773(97)00158-X ↗
10. Alternative perspectives on quasi-crystallinity: non-uniformity and nanocomposites10.1016/0167-577X(86)90063-7 ↗
11. Processing and characterization of alumina/chromium carbide ceramic nanocomposite
12. Mechanical properties of hard materials and their relation to microstructure10.1002/(SICI)1527-2648(199912)1:3/4<161::AID-ADEM161>3.0.CO;2-A ↗
13. Preparation of Y2O3-coated ZrO2 powder by suspension drying10.1023/A:1006714032131 ↗
14. Ultrasonically-assisted hydro-thermal synthesis of nanocrystalline ZrO2, TiO2, NiFe2O4 and Ni0.5Zn0.5Fe2O4 powders10.1016/j.ultsonch.2004.12.002 ↗
15. The synthesis of aluminum oxide nano-crystals in hydrothermal conditions
16. The formation of zirconium oxide nano-crystals in hydrothermal mediums of various chemical composition10.1023/A:1020409702215 ↗
17. Hydrothermal synthesis of nano-particles and nanocomposites in ZrO2–Al2O3–H2O system
18. Nanocrystalline zirconia based powders synthesized by hydrothermal method10.2298/PAC1203151T ↗
19. Sintering and densification of nanocrystalline ceramic oxide powders: a review10.1179/174367508X297812 ↗
20. Processing of nanocrystalline ceramics from ultrafine particles10.1179/imr.1996.41.3.85 ↗
21. Consolidation of ultrafine and nanocrystalline powder
22. Materials with fine microstructures by advanced powder metallurgy10.1016/0079-6425(90)90003-R ↗
23. Nanocrystalline materials—an overview
24. Effect of sintering temperature on density, porosity and hardness of a powder metallurgy component
25. Agglomeration and particle size effects on sintering yttria–stabilized zirconia10.1111/j.1151-2916.1981.tb09552.x ↗
26. Net shaping nanopowders with powerful ultrasonic action and methods of density distribution control10.1179/174367508X297830 ↗
27. Lower sintering temperature of nanostructured dense ceramics compacted from dry nanopowders using powerful ultrasonic action10.1088/1757-899X/18/8/082004 ↗
28. Microstructural evolution during the sintering of nanostructured ceramic oxides10.1111/j.1151-2916.1996.tb08573.x ↗
29. High-Frequency induction heat sintering of mechanically alloyed alumina–yttria-stabilized zirconia nano-bioceramics10.1111/j.1551-2916.2005.00902.x ↗
30. Nanostructured bulk solids by field activated sintering
31. The obtaining of high-density specimens and analysis of mechanical strength characteristics of a composite based on ZrO2-WC nanopowders10.1186/1556-276X-9-355 ↗
32. SHS for a large scale synthesis method of transition metal nanopowders
33. Sintering activation by external electrical field
34. Effects of heating rate on densification and grain growth during field assisted sintering of α-Al2O3 and MoSi2 powders10.1007/s11661-001-0053-6 ↗
35. Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activated powder mixtures10.2298/SOS0403155B ↗
36. Preparation of materials from aluminum oxide nanopowders using modern methods of consolidation10.3103/S1063457610060031 ↗
37. E.S. Gevorkyan, M.O. Azarenkov, S.V. Lytovchenko, V.O. Chishkala, L.A. Tymofeieva; O.M. Melnyk, Y.H. Hutsalenko, Device for hot pressing of powders by means of direct transmission of electric current, UA Patent 72841, 2012 (accessed 27.08.12).
38. V. Sirota, V. Ivanisenko, I. Pavlenko, Synthesis of nanosized stabilized zirconium dioxide under hydrothermal conditions, in: Proceedings of the NANOCON, Brno, Czech Republic, October 16–18, 2013 www.nanocon.eu, 2013.