journal article·2016-09Open access

High pressure FAST of nanocrystalline barium titanate

Martin B. Fraga, Jean-Pierre Delplanque, Nancy Yang, Enrique J. Lavernia, Todd C. Monson

Ceramics International· Volume 42· Issue 12

Abstract

Abstract This work studies the microstructural evolution of nanocrystalline ( 3 ), and presents high pressure in field-assisted sintering (FAST) as a robust methodology to obtain >100 nm BaTiO 3 compacts. Using FAST, two commercial ~50 nm powders were consolidated into compacts of varying densities and grain sizes. Microstructural inhomogeneities were investigated for each case, and an interpretation is developed using a modified Monte Carlo Potts (MCP) simulation. Two recurrent microstructural inhomogeneities are highlighted, heterogeneous grain growth and low-density regions, both ubiqutously present in all samples to varying degrees. In the worst cases, HGG presents an area coverage of 52%. Because HGG is sporadic but homogenous throughout a sample, the catalyst (e.g., the local segregation of species) must be, correspondingly, distributed in a homogenous manner. MCP demonstrates that in such a case, a large distance between nucleating abnormal grains is required—otherwise abnormal grains prematurely impinge on each other, and their size is not distinguishable from that of normal grains. Compacts sintered with a pressure of 300 MPa and temperatures of 900 °C, were 99.5% dense and had a grain size of 90±24 nm. These are unprecedented results for commercial BaTiO 3 powders or any starting powder of 50 nm particle size—other authors have used 16 nm lab-produced powder to obtain similar results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Progress in the synthesis of nanocrystalline BaTiO3 powders for MLCC10.1111/j.1744-7402.2005.02008.x ↗
2. Nanoscale ferroelectrics: processing, characterization and future trends10.1088/0034-4885/69/8/R04 ↗
3. H. Megaw, Crystal Structure of Barium Titanate, MACMILLAN MAGAZINES LTD PORTERS SOUTH, 4 CRINAN ST, LONDON N1 9XW, ENGLAND, 1945.
4. Ferroelectricity, domain structure, and phase transitions of barium titanate10.1103/RevModPhys.22.221 ↗
5. V. Polinger, Ferroelectric phase transitions in cubic perovskites, J. Phys. Conf. Ser. 428 (2013) 12026. doi:10.1088/1742–6596/428/1/012026.10.1088/1742-6596/428/1/012026 ↗
6. Chiang · 1997
7. Q. Zhang, T. Cagin, W.A. Goddard, The Ferroelectric and Cubic Phases in BaTiO3 Ferroelectrics Are Also antiferroelectric, Proc. Natl. Acad. Sci. 103 (2006) 14695–14700. doi:10.1073/pnas.0606612103.10.1073/pnas.0606612103 ↗
8. NMR evidence for the coexistence of order-disorder and displacive components in barium titanate10.1103/PhysRevLett.90.037601 ↗
9. Dielectric properties of barium titanate prepared by hot isostatic pressing10.1016/S0167-577X(96)00149-8 ↗
10. Piezoelectric properties of BaTiO3 ceramics prepared by hot isostatic pressing10.2109/jcersj2.121.655 ↗
11. Effect of sintering atmosphere on the dielectric properties of barium titanate based capacitors10.1016/S0025-5408(01)00540-2 ↗
12. Preparation of barium titanate porous ceramics and their sensor properties10.2109/jcersj2.121.698 ↗
13. Preparation of nanocrystalline BaTiO3 ceramics10.1007/s11431-009-0033-4 ↗
14. Preparation of fine-grained BaTiO3 ceramics by spark plasma sintering10.1557/JMR.2002.0081 ↗
15. Colossal dielectric permittivity of BaTiO3-based nanocrystalline ceramics sintered by spark plasma sintering10.1007/s10832-007-9396-8 ↗
16. Spark plasma sintering of nanocrystalline BaTiO3-powders: consolidation behavior and dielectric characteristics10.1016/j.jeurceramsoc.2011.03.035 ↗
17. Grain size-dependent properties of dense nanocrystalline barium titanate ceramics10.1111/j.1551-2916.2012.05409.x ↗
18. Synthesis of fine-crystalline tetragonal barium titanate in low-density water fluid10.1016/j.supflu.2015.05.004 ↗
19. Thermodynamic aspects and morphology of nano-structured ion conductors: aspects of nano-ionics Part I, Solid State Ion
20. Ferroelectric properties of nanocrystalline barium titanate ceramics10.1063/1.2213508 ↗
21. Grain-size effect on structure and phase transformations for barium titanate10.1103/PhysRevB.54.3158 ↗
22. Dielectric properties of fine-grained barium titanate ceramics10.1063/1.336051 ↗
23. Wide range dielectric spectroscopy on perovskite dielectrics10.1016/j.mseb.2008.11.039 ↗
24. Microstructures and mechanical properties of TiAl alloys consolidated by spark plasma sintering10.1016/j.intermet.2008.06.015 ↗
25. Toughness control of boron carbide obtained by spark plasma sintering in nitrogen atmosphere10.1016/j.ceramint.2013.09.141 ↗
26. Microstructure of a carbon fiber-reinforced aluminum matrix composite fabricated by spark plasma sintering in various pulse conditions10.1007/s10853-014-8032-7 ↗
27. Mechanical behavior of ultrafine-grained Ni–carbon nanotube composite10.1007/s10853-013-7897-1 ↗
28. Fundamental investigations on the spark plasma sintering/synthesis process: I. Effect of dc pulsing on reactivity10.1016/j.msea.2004.11.020 ↗
29. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
30. Consolidation/synthesis of materials by electric current activated/assisted sintering10.1016/j.mser.2008.09.003 ↗
31. Densification and properties of bulk nanocrystalline functional ceramics with grain size below 50 nm10.1016/j.jeurceramsoc.2012.12.004 ↗
32. Grain boundary faceting and abnormal grain growth in BaTiO310.1016/S1359-6454(99)00434-6 ↗
33. Dynamic observations of abnormal grain-growth occurring in barium titanate during sintering10.1017/S1431927604886331 ↗
34. Abnormal grain growth in undoped strontium and barium titanate10.1016/j.actamat.2009.09.007 ↗
35. Statistics of two-dimensional lattices with four components10.1103/PhysRev.64.178 ↗
36. Computer simulation of grain growth—I. Kinetics10.1016/0001-6160(84)90151-2 ↗
37. C.A.P.N. Guebels, A Monte Carlo Potts Investigation of Microstructural Evolution: Particle Assisted Abnormal Grain Growth, 2011. 〈http://adsabs.harvard.edu/abs/〉2011PhDT…….126G ((accessed February 20), 2014).
38. Three-dimensional grain growth modeling with a Monte Carlo algorithm10.1016/S0167-577X(03)00372-0 ↗
39. Computer simulation of grain growth-III. Influence of a particle dispersion10.1016/0001-6160(84)90089-0 ↗
40. Densification mechanisms in spark plasma sintering of nanocrystalline ceramics10.1016/j.msea.2006.07.092 ↗
41. Grain size and grain boundary-related effects on the properties of nanocrystalline barium titanate ceramics10.1016/j.jeurceramsoc.2006.02.005 ↗
42. Users SPPARKS Manual, (n.d.). 〈http://spparks.sandia.gov/doc/Manual.html〉 ((accessed July 27), 2014).
43. V.K. Pecharsky, P.Y. Zavalij, Fundamentals of powder diffraction and structural characterization of materials, Springer, New York, 2009. http://dx.doi.org/10.1007/978–0-387–09579-0 ((accessed November 12), 2014).10.1007/978-0-387-09579-0 ↗
44. Phase transitions in nanocrystalline barium titanate ceramics prepared by spark plasma sintering10.1111/j.1551-2916.2005.00836.x ↗
45. Thermodynamics of an eight-site order-disorder model for ferroelectrics10.1103/PhysRevB.13.207 ↗
46. Densification of uniformly small-grained BaTiO3 using spark-plasma-sintering10.1016/S0254-0584(03)00195-0 ↗
47. Grain-growth behavior during stepwise sintering of barium titanate in hydrogen gas and air10.1111/j.1151-2916.2003.tb03640.x ↗
48. Sintering kinetics by structural transition at grain boundaries in barium titanate10.1016/j.actamat.2004.02.039 ↗
49. Grain boundary segregation, solute drag and abnormal grain growth10.1016/j.actamat.2008.04.007 ↗
50. On abnormal subgrain growth and the origin of recrystallization nuclei10.1016/S1359-6454(03)00079-X ↗
51. Computer simulation of grain growth—IV. Anisotropic grain boundary energies10.1016/0001-6160(85)90093-8 ↗
52. Implementation of exact grain-boundary geometry into a 3-D Monte-Carlo (Potts) model for microstructure evolution10.1016/j.actamat.2009.02.034 ↗