journal article·2023-06Open access

MnFe2O4-based spinels by mechanochemical and thermochemical reaction of siderite and MnO2 powder mixtures

I. Antunes, L.C.M. Ruivo, L.A.C. Tarelho, A.A. Yaremchenko, A.V. Kovalevsky, J.R. Frade

Ceramics International· Volume 49· Issue 11

Abstract

The manganese ferrite has been processed by mechanosynthesis, using reactive siderite and MnO2 powder mixtures, with and without subsequent heat treatment. Taguchi planning was used to assess the impact of milling conditions (rotational speed and time) and subsequent calcination temperature on conversion of precursors, based on integrated intensities of the main XRD peaks of precursor phases FeCO3 (104) and MnO2 (110), and spinel phase (311), using Ni as internal pattern. Thermogravimetry provided additional information on the residual contents of reactants in the as-milled samples. The best conditions for complete conversion to spinel phase of as-milled samples were obtained by milling at 650 rpm, for 6 h (I311,sp / I111,Ni = 2.41) , and for calcined samples were obtained after milling at 650 rpm, for 3 h, and calcination at 650 ºC (I311,sp / I111,Ni = 2.35). The impact of processing conditions on structural features of the spinel phase was accounted by the contributions to variance of intensity of its (311) reflection, which were 90 % ascribed to rotational speed and only 4 % ascribed to milling time, for as-milled samples, or 58 %, 15 % and 16 % ascribed to rotational speed, milling time and calcination temperature, for calcined samples. Readier conversion of FeCO3 relative to MnO2 occurred during the milling stage, at low or intermediate rotational speed, with impact on Mn:Fe ratio in the spinel phase, as revealed by changes in lattice parameter of as-milled samples, in the range of 0.8424 to 0.8464 nm. Subsequent calcination minimized or eliminated traces of secondary phases. The incorporation of magnesium oxide and possibly other secondary components of the siderite precursor also induced structural changes in the resulting spinel phase, mainly in calcined samples (ao = 0.8370-0.8434 nm). Partial oxidation also contributed to structural changes in calcined samples, as revealed by differences between samples calcined in inert and oxidising atmospheres.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Advanced materials and composites · X-ray Diffraction in Crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Magnetic properties and structural analysis on spinel MnFe2O4 nanoparticles prepared via non-aqueous microwave synthesis10.1002/zaac.202100190 ↗
2. Temperature dependence of cation distribution and oxidation. State in magnetic Mn-Fe ferrite nanocrystals10.1021/ja973085l ↗
3. Valence change ability and geometrical occupation of substitution cations determine the pseudocapacitance of spinel ferrite XFe2O4(X = Mn, Co, Ni, Fe)10.1021/acs.chemmater.6b00713 ↗
4. A Structural and magnetic investigation of the inversion degree in ferrite nanocrystals MFe2O4 (M = Mn, Co, Ni)10.1021/jp901077c ↗
5. F.H. Martins, F.G. Silva, F.L.O. Paula, A.G. Juliano De, R. Aquino, J. Mestnik-Filho, P. Bonville, F. Porcher, R. Perzynski, J. Depeyrot, Local structure of core-shell MnFe2O4+δ - based nanocrystals: cation distribution and valence states of manganese ions, J. Phys. Chem. C 121 (2017) 8982-8991, doi:10.1021/acs.jpcc.6b09274.10.1021/acs.jpcc.6b09274 ↗
6. Titanium substituted manganese-ferrite as an oxygen carrier with permanent magnetic properties for chemical looping combustion of solid fuels10.1016/j.fuel.2017.01.030 ↗
7. Chemical Looping Combustion of gaseous and solid fuels with manganese-iron mixed oxide as oxygen carrier10.1016/j.enconman.2018.01.007 ↗
8. Thermodynamic assessment of the Fe-Mn-O system10.1007/s11669-009-9643-6 ↗
9. Thermal expansion and cation partitioning of MnFe2O4 (Jacobsite) from 1.6 to 1276 K studied by using neutron powder diffraction10.1016/j.ssc.2014.10.001 ↗
10. A comprehensive study on thermal stability and magnetic properties of MnZn-ferrite nanoparticles10.1016/j.jmmm.2018.11.052 ↗
11. Magnetic phase evolution and particle size estimation study on nanocrystalline Mg–Mn ferrites10.1007/s13204-013-0287-9 ↗
12. Formation of spinel Mn-ferrite during mechanical alloying10.1016/S0304-8853(97)00093-0 ↗
13. M.H. Mahmoud, H.H. Hamdeh, J.C. Ho, M.J. O’Shea, J.C. Walker, Moessbauer studies of manganese ferrite fine particles processed by ball-milling, J. Magn. Magn Mater. 220 (2000) 139-146, doi:10.1016/S0304-8853(00)00484-4.10.1016/S0304-8853(00)00484-4 ↗
14. Mechanosynthesis and process characterization of nanostructured manganese ferrite10.1016/j.matchemphys.2004.10.033 ↗
15. Synthesis of MnFe2O4 nanocrystals by wet-milling under atmospheric conditions10.1016/j.ceramint.2013.12.144 ↗
16. The effect of high energy milling on the solid state synthesis of MnFe2O4 from mixtures of MnO-Fe2O3 and Mn3O4-Fe2O310.1515/znb-2003-0510 ↗
17. Synthesis of manganese ferrite from manganese ore prepared by mechanical milling and its application as an inorganic heat-resistant pigment10.1016/j.jmrt.2020.05.122 ↗
18. A low temperature synthesis of MnFe2O4 nanocrystals by microwave-assisted ball-milling10.1016/j.cej.2012.10.061 ↗
19. Size dependent electrical and magnetic properties of mechanically-activated MnFe2O4 nanoferrite10.1016/j.ceramint.2015.07.006 ↗
20. Thermomagnetometry and thermal decomposition of siderite10.1016/0040-6031(81)85183-0 ↗
21. Study on Thermal Decomposition of MnO2 and Mn2O3 by Thermal Analysis10.2320/matertrans1960.24.754 ↗
22. Cullity · 1978
23. X-Ray determination of dolomite-calcite ratio of a carbonate rock
24. The influence on Fe content on Raman spectra and unit cell parameters of magnesite-siderite solid solutions10.1007/s00269-011-0479-3 ↗
25. Thermal behavior of natural dolomite10.1007/s10973-014-4301-6 ↗
26. Comparative study of the kinetics of the thermal decomposition of synthetic and natural siderite samples10.1007/s002690000093 ↗
27. Transformation of siderite to goethite by humic acid in the natural environment10.1038/s42004-020-0284-3 ↗
28. Dissolution-recrystallization of (Mg,Fe)CO3 during hydrothermal cycles: FeII/FeIII conundrums in the carbonation of ferromagnesian minerals10.1021/acs.cgd.7b00438 ↗
29. Kinetics of calcination of natural carbonate minerals10.1016/j.mineng.2020.106279 ↗
30. Mechanochemical access to defect-stabilized amorphous calcium carbonate10.1021/acs.chemmater.8b02339 ↗
31. An experimental investigation of extrapolation methods in the derivation of accurate unit-cell dimensions of crystals10.1088/0959-5309/57/3/302 ↗
32. Preparation and characterization of nanometric Mn ferrite via different methods
33. Synthesis of magnetically recyclable spinel ferrite (MFe2O4, M=Zn, Co, Mn) nanocrystals engineered by sol gel-hydrothermal technology: high catalytic performances for nitroarenes reduction10.1016/j.apcatb.2015.08.005 ↗
34. Structural, magnetic and Mössbauer studies on MnxFe3−xO4 (0⩽x⩽1)10.1007/BF02869943 ↗
35. Guidelines to design multicomponent ferrospinels for high-temperature applications10.1039/C6RA03671F ↗
36. Structure of nanocrystalline MgFe2O4 from X-ray diffraction, Rietveld and atomic pair distribution function analysis10.1107/S0021889805024477 ↗
37. Preparation and characterization of manganese ferrite aluminates10.1155/2008/703479 ↗
38. Exploring the effects of silica and zirconia additives on electrical and redox properties of ferrospinels10.1016/j.jeurceramsoc.2017.02.037 ↗
39. Mössbauer-effect study of calciomagnetites10.12693/APhysPolA.93.547 ↗
40. Electronic and magnetic properties of Ca-doped Mn-ferrite10.12693/APhysPolA.130.362 ↗
41. Oxidation induced strain and defects in magnetite crystals
42. Lattice parameters and site occupancy factors of magnetite-maghemite core-shell nanoparticles. A critical study10.1107/S1600576714019840 ↗
43. Determining magnetite/maghemite composition and core-shell nanostructure from magnetization curve for iron oxide nanoparticles10.1021/acs.jpcc.8b06927 ↗
44. Stability region and oxygen stoichiometry of manganese ferrite10.1016/S0167-2738(98)00118-0 ↗
45. One-pot synthesis and properties of Mn-doped maghemite nanoparticles using acetylacetonate precursors10.1007/s10967-021-07712-0 ↗
46. Kinetics of thermal decomposition of particulate samples of MgCO3: experiments and models10.3390/chemistry4020039 ↗