Corrosion behavior in simulated environments of ITZO films prepared by two targets co-sputtering
Source abstract
Abstract
Abstract Indium tin zirconium oxide (ITZO) films were deposited by a co-sputtering technique with ITO and zirconium targets. The stability and corrosion behavior of films in simulated environments were studied on account of microstructure and optical–electrical properties. The results show that ITZO films possess a better crystalline structure and optical–electrical properties. Zirconium-doping changes the preferred orientation of ITO films, and ITZO films under the optimum parameters have sheet resistance of 10 Ω/sq and transmittance of above 85%. According to the polarization measurements and the relative resistance change of the films in simulated environments such as acidic climate, oceanic climate and industrial climate, the doping films show better chemical and thermal stabilities than ITO films. Besides the influence of crystal structure, the better stability of zirconium oxide can improve the chemical and thermal stabilities. ITZO films have better electrical stability and chemical antcaustic properties, and the films could find more extensive applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. High mobility transparent conducting oxides for thin film solar cells10.1016/j.tsf.2009.09.044 ↗
2. Influence of oxygen in the deposition and annealing atmosphere on the characteristics of ITO thin films prepared by sputtering at room temperature10.1016/j.vacuum.2005.10.006 ↗
3. Effect of surface treatment and functionalization on the ITO properties for OLEDs10.1016/j.msec.2005.10.078 ↗
4. Comparative study of resistivity characteristics between transparent conducting AZO and GZO thin films for use at high10.1016/j.tsf.2009.10.134 ↗
5. Industrially-styled room-temperature pulsed laser deposition of ZnO:Al films
6. Large scale F-doped SnO2 coating on galss by spray pyrolysis10.1016/j.tsf.2005.08.259 ↗
7. Preparation and characterisation of solar selective SnOx:F coated aluminum reflector surfaces10.1016/S0040-6090(00)01045-2 ↗
8. ITO films sputter-deposited using an ITO target sintered with vanadium oxide additive10.1016/S0921-5107(98)00124-X ↗
9. Effect of aluminum doping on the high-temperature stability and piezoresistive response of indium tin oxide strain sensors10.1016/j.tsf.2004.10.045 ↗
10. Preparation and characterization of Ni-indium tin oxide cosputtered thin films for organic light-emitting diode application10.1016/j.tsf.2004.08.005 ↗
11. A review about the surface resistance technique in electrochemistry10.1016/j.surfrep.2004.09.001 ↗