Analysis of the Microstructure and Hardness of Flake Graphite Cast Iron Using the Barkhausen Noise Method and Conventional Techniques
Source abstract
Abstract
Abstract The new brake disc was evaluated for microstructure and hardness by the conventional destructive tests and non-destructive Barkhausen noise method (BNM). Ten non-destructive measurements were carried out in different areas of a brake disc, which were then cut out and made into metallographic test samples. Qualitative and quantitative analysis of graphite precipitates was performed to assess their volume in material matrix, anisotropy and size. Subsequently, graphs showing the relationships between selected stereological parameters of graphite precipitates and parameters determined from the RMS envelope of Barkhausen noise were elucidated. Similar relationships between hardness and parameters coming from non-destructive tests were carried out. Magnetic parameters that specified the size of a graphite precipitate was selected. In addition, repeatability studies using BNM were carried out in the areas of the material with the smallest and largest average size of graphite precipitates. A linear relationship between amplitude of BN and length of graphite flakes was found. The paper presents the possibilities of assessing the volume and size of graphite precipitates, as well as cast iron hardness using BNM.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Masaud, I.M., Al-Jarrah, J.A., Abu Mansour, T.: Manufacturing of gray cast iron automotive disc brake. Ind. J. Appl. Res. 4, 129–131 (2014)10.15373/2249555X/MAR2014/37 ↗
2. Polak, A., Grzybek, J.: The mechanism of changes in the surface layer of grey cast iron automotive brake disc. Mater. Res. 8, 475–479 (2005). https://doi.org/10.1590/S1516-1439200500040002010.1590/S1516-14392005000400020 ↗
3. Walton, C.F., Opar, T.J.: Iron casting handbook. Iron Casting Society Inc, New York (1981)
4. Konoplyuk, S., Abe, T., Uchimoto, T., Takogi, T., Kurosawa, M.: Characterization of ductile cast iron by eddy current method. NDT E Int. 38, 623–626 (2005). https://doi.org/10.1016/j.ndteint.2005.02.00810.1016/j.ndteint.2005.02.008 ↗
5. Encyklopedia of Modern Physics [in Polish] PWN, Warszawa (1983)
6. Piech, T.: Magnetic research. The use of the Barkhausen effect [in Polish]. Biuro Gamma, Warszawa (1998)
7. Jiles, D.: Introduction to magnetism and magnetic materials. Taylor and Francis Group, New York (1998)
8. Blaow, A., Evans, J.T., Shaw, B.A.: The effect of microstructure and applied stress on magnetic Barkhausen emission in induction hardened steel. J. Mater. Sci. 42, 4364–4371 (2007). https://doi.org/10.1007/s10853-006-0631-510.1007/s10853-006-0631-5 ↗
9. O’Sullivan, D., Cotterell, M., Cassidy, S., Tanner, D.A., Mészáros, I.: Magneto-acoustic emission for the characterisation of ferritic stainless steel microstructural state. J. Magn. Magn. Mater. 271, 381–389 (2004). https://doi.org/10.1016/j.jmmm.2003.10.00410.1016/j.jmmm.2003.10.004 ↗
10. Saquet, O., Chicois, J., Vincent, A.: Barkhausen noise from plan carbon steel: analysis of the influence of microstructure. Mat. Sci. Eng. A269, 73–82 (1999). https://doi.org/10.1016/S0921-5093(99)00155-010.1016/S0921-5093(99)00155-0 ↗
11. Davut, K.: Characterization of steel microstructures by magnetic Barkhausen noise technique. MS Thesis, Middle East Technical University, Ankara (2006)
12. Kleber, X., Hug-Amalric, A., Merlin, J.: Evaluation of proportion of phases and mechanical strength of two-phase steels using Barkhausen noise measurements: application to commercial dual-phase steel. Metall. Mater. Trans. A39, 1308–1318 (2008). https://doi.org/10.1007/s11661-008-9508-310.1007/s11661-008-9508-3 ↗
13. Davut, K., Gür, C.H.: Monitoring the microstructural evolution in spheroidized steels by magnetic Barkhausen noise measurements. JNondestruct. Eval. 29, 241–247 (2010). https://doi.org/10.1007/s10921-010-0082-410.1007/s10921-010-0082-4 ↗
14. Yamuara, S., Furuya, Y., Watanabe, T.: The effect of grain boundary microstructure on Barkhausen noise in ferromagnetic materials. Acta Mater. 49, 3019–3027 (2001). https://doi.org/10.1016/S1359-6454(01)00189-610.1016/S1359-6454(01)00189-6 ↗
15. Akçaoğlu, F., Gür, C.H.: Monitoring magnetic anisotropy variations in cold-rolled steels by magnetic Barkhausen noise, 11th European conference on non-destructive testing (ECNDT 2014), October 6–10. Prague, Czech Republic. (2014) https://www.ndt.net/events/ECNDT2014/app/content/Paper/458_Gur_Rev1.pdf
16. Mohopatra, J.N., Ray, A.K., Swaminathan, J., Mitra, A.: Creep behavior study of virgin and service exposed 5Cr-0.5Mo steel using magnetic Barkhausen emissions technique. J. Magn. Magn. Mater. 320, 2284–2290 (2008)10.1016/j.jmmm.2008.04.152 ↗
17. Makowska, K., Kowalewski, Z.L., Augustyniak, B., Piotrowski, L.: Determination of mechanical properties of P91 steel by means of magnetic Barkhausen emission. J. Theor. Appl. Mech. 52, 181–188 (2014)
18. Makowska, K., Kowalewski, Z.L.: Variation of Barkhausen noise, magnetic and crystal structure of ferromagnetic medium-carbon steel after different loading processes. Phys. MetMetallogr. 121, 115–122 (2020)10.1134/S0031918X20020118 ↗
19. Gür, C.H., Kilicli V., Erdogan, M.: Investigation the austempering parameters of ductile iron by magnetic Barkhausen noise technique, 17th World Conference on Nondestructive testing, Shanghai, China, 25–28 October. (2008) https://www.ndt.net/article/wcndt2008/papers/473.pdf
20. Kiliçli, V., Yalçin A., Davut, K.: Non-destructive determination of pearlite content of ductile iron castings by magnetic Barkhausen Noise Analysis Technique, 19th International Metallurgy & Materials Congress, 1–4. (2018) https://www.semanticscholar.org/paper/Non-Destructive-Determination-of-Pearlite-Content-Kilicli-Yalcin/e3b46b1e4f2242b343d4a2549f32a1bad1cfeb9c
21. Stupakov, O., Uchimoto, T., Takagi, T., Sanaee, S.A., Tomás, I.: Evaluation of ductile cast iron microstructure by magnetic hysteresis and Barkhausen noise method. St Appl. ElecMech. Electr. Nondestruct. Eval. 32, 232–239 (2009). https://doi.org/10.3233/978-1-60750-023-0-23210.3233/978-1-60750-023-0-232 ↗
22. Hetherington, M.G., Jakubovics, J.P., Szpunar, J.A., Tanner, B.K.: High-voltage Lorentz electron microscopy studies of domain structures and magnetization processes in pearlitic steels. Phil. Mag. B56, 561–577 (1987). https://doi.org/10.1080/1364281870822016310.1080/13642818708220163 ↗
23. Gür, C.H., Ozer, M., Erdogan, M.: Investigation of the variations in microstructure and mechanical properties of dual-matrix ductile iron by magnetic Barkhausen noise analysis. ResNondestr. Eval. 19, 44–60 (2008). https://doi.org/10.1080/0934984070163527810.1080/09349840701635278 ↗
24. Altpeter, I.: Nondestructive evaluation of cementite content in stell and white cast iron using inductive Barkhausen noise. J. Nondestruct. Eval. 15, 45–60 (1996)10.1007/BF00729134 ↗
25. Buttle, D.J., Scruby, C.B., Jakubovics, J.P., Briggs, G.A.D.: Magneto-acoustic and Barkhausen emission: their dependence on dislocations in iron. Phil. Maga. A 55, 717–734 (1987). https://doi.org/10.1080/0141861870821437910.1080/01418618708214379 ↗
26. Dudziewicz, J.: Fundamentals of electromagnetism [in Polish]. WNT, Warsaw (1972)
27. Ryś, J.: Stereology of materials [in Polish], Fotobit Design, Kraków (1995)
28. Altpeter, I., Becker, R., Dobmann, G., Kern, R., Theiner, W., Yashan, A.: Robust solutions of inverse problems in electromagnetic non-destructive evaluation. Invers. Problems 18, 1907–1921 (2002). https://doi.org/10.1088/0266-5611/18/6/32810.1088/0266-5611/18/6/328 ↗
29. Gür, C.H., Çam, Ī: Comparison of magnetic Barkhausen noise and ultrasonic velocity measurement for microstructure evaluation of SAE 1040 and SAE 4140 steels. Mater. Char. 58, 447–452 (2007). https://doi.org/10.1016/j.matchar.2006.06.00810.1016/j.matchar.2006.06.008 ↗
30. Claptan, L., Jagadish, C., Atherton, D.L.: The influence of pearlite on Barkhausen noise generation in plain carbon steels. Acta Met. Mater. 39, 1555–1562 (1991). https://doi.org/10.1016/0956-7151(91)90242-S10.1016/0956-7151(91)90242-S ↗
31. Lo, C.C.H., Lee, S.J., Kerdus, L.C., Jiles, D.C.: Examination of the relationship between the parameters of Barkhausen effect model and microstructure of magnetic materials. J. Appl. Phys. 91, 7651–7654 (2002). https://doi.org/10.1063/1.145331210.1063/1.1453312 ↗
32. D’Amato, C., Verdu, C., Kleber, X., Regheere, G., Vincent, A.: Characterization of austempered ductile iron though Barkhaisen noise measurements. J. Nondestruct. Eval. 22, 127–139 (2003). https://doi.org/10.1023/B:JONE.0000022032.66648.c510.1023/B:JONE.0000022032.66648.c5 ↗
33. Blaow, M.M., Shaw, B.A.: Magnetic Barkhausen noise profile analysis: effect of excitation field strength and detection coil sensitivity in case carburized steel. Mat. Sci. Appl. 5, 258–266 (2014). https://doi.org/10.4236/msa.2014.5503010.4236/msa.2014.55030 ↗
34. Augustyniak, M., Augustyniak, B., Piotrowski, O.L., Chmielewski, M.: Determination conditions in a double-core Barkhausen noise measurement set-up. J. Nondestruct. Eval. 34, 1–8 (2015). https://doi.org/10.1007/s10921-015-0288-610.1007/s10921-015-0288-6 ↗
35. Santa-aho, S., Laitinen, A., Sorsa, A., Vippola, M.: Barkhausena noise probes and modelling: a review. J. Nondestruct. Eval. 38, 1–11 (2018). https://doi.org/10.1007/s10921-019-0636-z10.1007/s10921-019-0636-z ↗
36. Microstructure of cast irons -- Part 1: Graphite classification by visual analysis (ISO 945–1:2019)